The original manufacturer has stopped making it, the drawing is lost, and the machine is still in service. This is the situation most of our export enquiries start from.
A worn component tells us everything a drawing would, and often more — it shows where it failed and what the mating surfaces actually look like after years of service. Post the part to us and we will measure it on a coordinate basis, not with a ruler.
We measure it, reconstruct a dimensioned drawing, identify the material and the sealing concept, and send you the drawing for approval before manufacture. You keep a drawing of a part you previously had none for — which is useful the next time it fails.
For simple parts — a manifold block, a fitting, a blanking plate — a set of photographs with a steel rule laid across the ports is often enough to quote and produce. For anything with a spring, a spool or a setting, we will need the part or at least its critical dimensions.
Geometry can be reverse engineered. A pressure setting cannot. If a valve is a safety component, we will ask you to confirm the cracking pressure and we will not infer it from the spring we find inside — springs relax with age, and a copied setting is not a setting.
Tell us what the part is and send it. We will confirm we can measure it and give you a drawing and a price. Arrange a sample.